8 material differences · fewer than 12
Tractor oneInternational Harvester 4541970–1973No measured PTO figureTractor twoJohn Deere-LANZ 7101965–1967No measured PTO figure
Which should you choose?
Read our verdict on the 454 and the 710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 454 | 710 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER D-179 | John Deere 202 D 23 L | differs |
| Displacement declared | 2.93 L | 3.32 L | +13% 710 |
| Maximum torque declared | 131 lb·ft · 178 N·m | 132 lb·ft · 178 N·m | — |
| Transmission | |||
| Top speed declared | 19.9 mph · 32 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.4–12.6 gpm · 43.1–47.7 L/min | 4.1 gpm · 15.6 L/min | differs |
| Pressure declared | — | 2,162 psi · 149 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,720 lb · 2,141 kg | 4,925 lb · 2,234 kg | — |
| Maximum permissible mass declared | — | 7,716 lb · 3,500 kg | — |
| Wheelbase declared | 75.2 in · 1,910 mm | 86.6 in · 2,200 mm | +15% 710 |
| Length declared | 133.0 in · 3,378 mm | 139.0 in · 3,530 mm | — |
| Width declared | 66.0 in · 1,676 mm | 70.5 in · 1,790 mm | +7% 710 |
| Ground clearance declared | 10.0 in · 254 mm | 19.7 in · 500 mm | +97% 710 |
| Turning radius, braked declared | 9.2 ft · 2.79 m | 10.2 ft · 3.10 m | +11% 710 |
| Fuel tank declared | 74.0 qt · 70.0 L | 74.0 qt · 70.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 454 sources
Source
- Source: Traktorenlexikon, “IHC 454 (USA)”
- Source: Traktorenlexikon, “McCormick 523”
John Deere-LANZ 710 sources
Source
- Source: Traktorenlexikon, “John Deere-Lanz 710”