International Harvester 3788 vs J.I. Case 3294
7 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1979–1981; 1984–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 3788 | 3294 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 170.6 hp | 194.3 hp | +14% 3294 |
| Engine declared | INTERNATIONAL HARVESTER DT-466 B | CASE 504 BDT | differs |
| Displacement declared | 7.64 L | 8.26 L | +8% 3294 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 23.0 gpm · 87.1 L/min | +92% 3294 |
| Three-point lift at ends declared | 8,598 lb · 3,900 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,620 lb · 8,446 kg | 17,915 lb · 8,126 kg | — |
| Wheelbase declared | 110.0 in · 2,794 mm | 104.0 in · 2,642 mm | +6% 3788 |
| Length declared | 228.0 in · 5,791 mm | 182.0 in · 4,623 mm | +25% 3788 |
| Width declared | 101.6 in · 2,581 mm | 96.0 in · 2,438 mm | +6% 3788 |
| Height declared | 115.8 in · 2,941 mm | 116.9 in · 2,970 mm | — |
| Ground clearance declared | 23.2 in · 589 mm | 22.5 in · 572 mm | — |
| Turning radius, braked declared | — | 14.8 ft · 4.52 m | — |
| Fuel tank declared | 360.0 qt · 340.7 L | 259.9 qt · 246.0 L | +38% 3788 |
International Harvester 3788 sources
Source
- Source: Traktorenlexikon, “IHC 3788”
- Source: Traktorenlexikon, “IHC 3588”
J.I. Case 3294 sources
Source
- Source: Traktorenlexikon, “Case 3294”
- Source: Traktorenlexikon, “Case 2290”