International Harvester 3288 vs Massey Ferguson MF 3085 A

8 material differences · fewer than 12

Tractor one

1981–1985

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 3288 and the MF 3085 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester 3288 and Massey Ferguson MF 3085 A, field by field
Field	3288	MF 3085 A	Gap
Engine
Engine power, claimed claimed	89.7 hp	98.7 hp	+10% MF 3085 A
Engine declared	INTERNATIONAL HARVESTER D-358	Perkins 1006.6 HR-4	differs
Displacement declared	5.87 L	5.99 L	—
Maximum torque declared	—	280 lb·ft · 379 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated ceramic clutch	Pedal-operated, dry and air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	15.0 gpm · 56.8 L/min	14.3 gpm · 54.0 L/min	—
Three-point lift at ends declared	6,704 lb · 3,041 kg	7,891 lb · 3,579 kg	+18% MF 3085 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,759 lb · 5,334 kg	10,472 lb · 4,750 kg	+12% 3288
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	104.8 in · 2,662 mm	106.3 in · 2,699 mm	—
Length declared	184.0 in · 4,674 mm	170.2 in · 4,323 mm	+8% 3288
Width declared	102.0 in · 2,591 mm	74.8 in · 1,899 mm	+36% 3288
Height declared	112.0 in · 2,845 mm	109.2 in · 2,774 mm	—
Ground clearance declared	13.0 in · 330 mm	17.7 in · 450 mm	+36% MF 3085 A
Turning radius, braked declared	11.9 ft · 3.63 m	—	—
Fuel tank declared	200.0 qt · 189.3 L	182.8 qt · 173.0 L	+9% 3288

Source

Source