International Harvester 1055 XL vs Renault 110-54 TX

10 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

1989–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 1055 XL and the 110-54 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 1055 XL and Renault 110-54 TX, field by field
Field	1055 XL	110-54 TX	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.7 hp	—
Engine declared	IH D-358	MWM D 226-6	differs
Displacement declared	5.87 L	6.23 L	+6% 110-54 TX
Maximum torque declared	279 lb·ft · 378 N·m	284 lb·ft · 385 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry LuK double clutch type DT 330/330	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	10.9 gpm · 41.1 L/min	+14% 110-54 TX
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift at ends declared	—	16,006 lb · 7,260 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,634 lb · 4,370 kg	11,111 lb · 5,040 kg	+15% 110-54 TX
Maximum permissible mass declared	—	17,857 lb · 8,100 kg	—
Wheelbase declared	103.5 in · 2,630 mm	107.9 in · 2,740 mm	—
Length declared	165.1 in · 4,194 mm	200.0 in · 5,080 mm	+21% 110-54 TX
Width declared	90.8 in · 2,306 mm	97.2 in · 2,470 mm	+7% 110-54 TX
Height declared	109.1 in · 2,770 mm	117.3 in · 2,980 mm	+8% 110-54 TX
Ground clearance declared	20.2 in · 512 mm	19.7 in · 500 mm	—
Turning radius, braked declared	14.4 ft · 4.40 m	16.4 ft · 5.00 m	+14% 110-54 TX
Fuel tank declared	147.9 qt · 140 L	158.5 qt · 150.0 L	+7% 110-54 TX

Source

Source