11 material differences · fewer than 12
Tractor oneInternational Harvester 10551977–1982No measured PTO figureTractor twoSchlüter 1050T/1050TV1974–1977No measured PTO figure
Which should you choose?
Read our verdict on the 1055 and the 1050T/1050TV → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1055 | 1050T/1050TV | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 99 hp | 99 hp | — |
| Engine declared | IH D-358 | Schlüter SDMT 110 W4 | differs |
| Displacement declared | 5.87 L | 4.75 L | +23% 1055 |
| Maximum torque declared | 281 lb·ft · 381 N·m | 319 lb·ft · 432 N·m | +13% 1050T/1050TV |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.5 mph · 29.7 km/h | differs |
| Clutch declared | Dry double clutch by Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.5 gpm · 39.9 L/min | — | — |
| Pressure declared | 2,466 psi · 170 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 582/972 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,458 lb · 4,290 kg | 7,959–8,907 lb · 3,610–4,040 kg | differs |
| Wheelbase declared | 103.4 in · 2,626 mm | 92.4 in · 2,346 mm | +12% 1055 |
| Length declared | 165.1 in · 4,194 mm | 155.5 in · 3,950 mm | +6% 1055 |
| Width declared | 80.7 in · 2,049 mm | 80.7 in · 2,050 mm | — |
| Ground clearance declared | 20.3 in · 516 mm | 14.4–16.5 in · 365–420 mm | differs |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 11.8–13.1 ft · 3.60–4.00 m | differs |
| Fuel tank declared | 147.9 qt · 140 L | 132.1 qt · 125 L | +12% 1055 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 1055 sources
- Source: Traktorenlexikon, “IHC 1055”
- Source: Traktorenlexikon, “IHC 1055 XL”
Schlüter 1050T/1050TV sources
- Source: Traktorenlexikon, “Schlüter Compact 1050T /1050TV”