International Harvester 1055 vs Renault 110-54 TX

11 material differences · fewer than 12

Tractor one

1977–1982

No measured PTO figure

Tractor two

1989–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 1055 and the 110-54 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester 1055 and Renault 110-54 TX, field by field
Field	1055	110-54 TX	Gap
Engine
Engine power, claimed claimed	99 hp	98.7 hp	—
Engine declared	IH D-358	MWM D 226-6	differs
Displacement declared	5.87 L	6.23 L	+6% 110-54 TX
Maximum torque declared	281 lb·ft · 381 N·m	284 lb·ft · 385 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry double clutch by Fichtel & Sachs	Dry LuK double clutch type DT 330/330	differs
Hydraulics & hitch
Pump flow declared	10.5 gpm · 39.9 L/min	10.9 gpm · 41.1 L/min	—
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift at ends declared	9,535 lb · 4,325 kg	16,006 lb · 7,260 kg	+68% 110-54 TX
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,458 lb · 4,290 kg	11,111 lb · 5,040 kg	+17% 110-54 TX
Maximum permissible mass declared	—	17,857 lb · 8,100 kg	—
Wheelbase declared	103.4 in · 2,626 mm	107.9 in · 2,740 mm	—
Length declared	165.1 in · 4,194 mm	200.0 in · 5,080 mm	+21% 110-54 TX
Width declared	80.7 in · 2,049 mm	97.2 in · 2,470 mm	+21% 110-54 TX
Height declared	104.3 in · 2,649 mm	117.3 in · 2,980 mm	+12% 110-54 TX
Ground clearance declared	20.3 in · 516 mm	19.7 in · 500 mm	—
Turning radius, braked declared	14.4 ft · 4.40 m	16.4 ft · 5.00 m	+14% 110-54 TX
Fuel tank declared	147.9 qt · 140 L	158.5 qt · 150.0 L	+7% 110-54 TX

Source

Source