7 material differences · fewer than 12

Tractor oneInternational Harvester Farmall 856 (A)1967–1971No measured PTO figureTractor twoJ.I. Case 10311966–1969No measured PTO figure

Which should you choose?

Read our verdict on the Farmall 856 (A) and the 1031 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester Farmall 856 (A) and J.I. Case 1031, field by field
FieldFarmall 856 (A)1031Gap
Engine
Engine power, claimed claimed101 hp102.1 hp—
Engine declaredINTERNATIONAL HARVESTER C-301——
Maximum torque declared326 lb·ft · 442 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% Farmall 856 (A)
Hydraulics & hitch
Pump flow declared12.0 gpm · 45.5 L/min12.0 gpm · 45.4 L/min—
Rear PTO speeds declared540/1000 rpm1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,501 lb · 3,856 kg9,334 lb · 4,234 kg+10% 1031
Wheelbase declared101.0 in · 2,565 mm108.9 in · 2,767 mm+8% 1031
Length declared167.0 in · 4,242 mm165.0 in · 4,191 mm—
Width declared92.0 in · 2,337 mm88.0 in · 2,235 mm—
Ground clearance declared22.0 in · 559 mm16.0 in · 406 mm+38% Farmall 856 (A)
Turning radius, braked declared9.5 ft · 2.90 m11.2 ft · 3.43 m+18% 1031
Fuel tank declared168.0 qt · 159.0 L192.0 qt · 181.7 L+14% 1031

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester Farmall 856 (A) sources

Source
  • Source: Traktorenlexikon, “Farmall Farmall 856”
  • Source: Traktorenlexikon, “IHC 806”

J.I. Case 1031 sources

Source
  • Source: Traktorenlexikon, “Case 1031”