International Harvester Farmall 656 vs John Deere 3010
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the Farmall 656 and the 3010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Farmall 656 | 3010 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-263 | — | — |
| Maximum torque declared | — | 171 lb·ft · 231 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–21.1 mph · 25–34 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated dry single-disc clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | 18.0 gpm · 68.0 L/min | +49% 3010 |
| Pressure declared | — | 2,247 psi · 155 bar | — |
| Three-point lift at ends declared | — | 3,968 lb · 1,800 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,250 lb · 2,835 kg | 6,967 lb · 3,160 kg | +11% 3010 |
| Wheelbase declared | 96.3 in · 2,446 mm | 81.5 in · 2,070 mm | +18% Farmall 656 |
| Length declared | 152.0 in · 3,861 mm | 147.6 in · 3,750 mm | — |
| Width declared | 87.0 in · 2,210 mm | 83.7 in · 2,125 mm | — |
| Height declared | 77.0 in · 1,956 mm | 76.8 in · 1,950 mm | — |
| Ground clearance declared | 21.0 in · 533 mm | 19.3 in · 490 mm | +9% Farmall 656 |
| Turning radius, braked declared | 9.1 ft · 2.77 m | 10.7 ft · 3.25 m | +17% 3010 |
| Fuel tank declared | 132.1 qt · 125.0 L | 116.2 qt · 110.0 L | +14% Farmall 656 |
International Harvester Farmall 656 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 656”
- Source: Traktorenlexikon, “IHC Farmall 560”
John Deere 3010 sources
Source
- Source: Traktorenlexikon, “John Deere 3010”