11 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 5041961–1968No measured PTO figureTractor twoRenault 461 (S)1972–1987No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 504 and the 461 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmall 504 | 461 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.3 hp | 45.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-153 | MWM D 327-3 | differs |
| Displacement declared | 2.49 L | 2.83 L | +13% 461 (S) |
| Maximum torque declared | — | 122 lb·ft · 165 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 504 |
| Clutch declared | Pedal operated dry single plate clutch | Dry Verto double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | 6.5 gpm · 24.5 L/min | +86% Farmall 504 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,386 lb · 2,443 kg | 5,677 lb · 2,575 kg | +5% 461 (S) |
| Wheelbase declared | 89.0 in · 2,261 mm | 83.0 in · 2,107 mm | +7% Farmall 504 |
| Length declared | 132.8 in · 3,372 mm | 131.2 in · 3,332 mm | — |
| Width declared | 83.0–96.5 in · 2,108–2,451 mm | 66.1–85.0 in · 1,680–2,160 mm | differs |
| Ground clearance declared | 23.3 in · 591 mm | 15.7 in · 400 mm | +48% Farmall 504 |
| Turning radius, braked declared | 8.2 ft · 2.50 m | 10.9 ft · 3.32 m | +33% 461 (S) |
| Fuel tank declared | 90.0 qt · 85.2 L | 50.7 qt · 48.0 L | +78% Farmall 504 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 504 sources
- Source: Traktorenlexikon, “Farmall Farmall 504”
- Source: Traktorenlexikon, “McCormick Farmall-H”
Renault 461 (S) sources
- Source: Traktorenlexikon, “Renault 461 R7441”