International Harvester Farmall 1206 vs OLIVER 1950 (4 WD)
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the Farmall 1206 and the 1950 (4 WD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Farmall 1206 | 1950 (4 WD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 112.4 hp | 105.5 hp | +6% Farmall 1206 |
| Engine declared | INTERNATIONAL HARVESTER DT-361 | GENERAL-MOTORS 4V-53 N | differs |
| Displacement declared | 5.91 L | 3.48 L | +70% Farmall 1206 |
| Maximum torque declared | — | 271 lb·ft · 367 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 1206 |
| Clutch declared | — | Foot-operated dry Borg & Beck single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.8 gpm · 44.5 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 549/984 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,115 lb · 4,588 kg | 12,974 lb · 5,885 kg | +28% 1950 (4 WD) |
| Wheelbase declared | 104.8 in · 2,662 mm | 105.0 in · 2,667 mm | — |
| Length declared | 153.0 in · 3,886 mm | 159.5 in · 4,051 mm | — |
| Width declared | 94.0 in · 2,388 mm | 86.5 in · 2,197 mm | +9% Farmall 1206 |
| Height declared | 86.0 in · 2,184 mm | 75.0 in · 1,904 mm | +15% Farmall 1206 |
| Ground clearance declared | 23.5 in · 597 mm | 18.5 in · 470 mm | +27% Farmall 1206 |
| Turning radius, braked declared | 10.9 ft · 3.33 m | 12.9 ft · 3.94 m | +18% 1950 (4 WD) |
| Fuel tank declared | 140.0 qt · 132.5 L | 111.0 qt · 105.0 L | +26% Farmall 1206 |
International Harvester Farmall 1206 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 1206”
- Source: Traktorenlexikon, “IHC 1206”
OLIVER 1950 (4 WD) sources
Source
- Source: Traktorenlexikon, “Oliver 1950”