8 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 10261970–1971No measured PTO figureTractor twoMassey Ferguson MF 11141978–1990No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 1026 and the MF 1114 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmall 1026 | MF 1114 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 112.4 hp | 109 hp | — |
| Engine declared | INTERNATIONAL HARVESTER DT-407 | Perkins A 6.354-4 | differs |
| Displacement declared | 6.67 L | 5.80 L | +15% Farmall 1026 |
| Maximum torque declared | — | 273 lb·ft · 370 N·m | — |
| Transmission | |||
| Top speed declared | 17.4 mph · 28 km/h | 15.5 mph · 25 km/h | +12% Farmall 1026 |
| Clutch declared | Hydraulically operated friction clutch | Pedal-operated dry Luk double clutch with 330 mm diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | — | — |
| Pressure declared | — | 2,418 psi · 166.7 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,100 lb · 5,035 kg | 10,692 lb · 4,850 kg | — |
| Wheelbase declared | 104.8 in · 2,662 mm | 111.8 in · 2,840 mm | +7% MF 1114 |
| Length declared | 165.0 in · 4,191 mm | 185.0 in · 4,700 mm | +12% MF 1114 |
| Width declared | 110.0 in · 2,794 mm | 98.4 in · 2,500 mm | +12% Farmall 1026 |
| Ground clearance declared | 16.0 in · 406 mm | — | — |
| Turning radius, braked declared | 12.0 ft · 3.66 m | — | — |
| Fuel tank declared | 168.0 qt · 159.0 L | 190.2 qt · 180.0 L | +13% MF 1114 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 1026 sources
- Source: Traktorenlexikon, “Farmall Farmall 1026”
- Source: Traktorenlexikon, “IHC 1026”
Massey Ferguson MF 1114 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1114”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”