12 material differences
Tractor oneInternational Harvester F-235 D1957–1959No measured PTO figureTractor twoLeyland 1541969–1972No measured PTO figure
Which should you choose?
Read our verdict on the F-235 D and the 154 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | F-235 D | 154 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 25.6 hp | 24.9 hp | — |
| Engine declared | INTERNATIONAL HARVESTER FD-123 | LEYLAND-MOTORS B 15 T | differs |
| Displacement declared | 2.01 L | — | — |
| Transmission | |||
| Top speed declared | 10.6 mph · 17 km/h | 15.5 mph · 25 km/h | +47% 154 |
| Clutch declared | Pedal-operated dry FERODO single-plate clutch | Pedal-operated dry Borg & Beck single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.6 gpm · 17.3 L/min | 3.8 gpm · 14.5 L/min | +19% F-235 D |
| Rear PTO speeds declared | 539 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,560 lb · 1,615 kg | 2,220–2,275 lb · 1,007–1,032 kg | differs |
| Wheelbase declared | 91.1 in · 2,315 mm | 67.0 in · 1,702 mm | +36% F-235 D |
| Length declared | 130.5 in · 3,315 mm | 109.4 in · 2,780 mm | +19% F-235 D |
| Width declared | 78.0–87.8 in · 1,981–2,229 mm | 60.5 in · 1,537 mm | differs |
| Ground clearance declared | 22.3 in · 567 mm | 12.8 in · 324 mm | +75% F-235 D |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 9.4 ft · 2.87 m | +20% F-235 D |
| Fuel tank declared | 44.1 qt · 41.75 L | 33.6 qt · 31.8 L | +31% F-235 D |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester F-235 D sources
Source
- Source: Traktorenlexikon, “McCormick F-235 D”
- Source: Traktorenlexikon, “McCormick Super-FC-D”
Leyland 154 sources
Source
- Source: Traktorenlexikon, “Leyland 154”