6 material differences · fewer than 12

Tractor oneInternational Harvester D-324 Standard1958–1962No measured PTO figureTractor twoKramer KB 251953–1957No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1958–1962; 1953–1957). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

6 material differences · 8 fields identical or within 5%, which is not counted as material

International Harvester D-324 Standard and Kramer KB 25, field by field
FieldD-324 StandardKB 25Gap
Engine
Engine power, claimed claimed23.7 hp24 hp—
Engine declaredINTERNATIONAL-HARVESTER DD-111Güldner 2 BNdiffers
Displacement declared1.83 L1.84 L—
Maximum torque declared73 lb·ft · 99 N·m72 lb·ft · 98 N·m—
Transmission
Top speed declared11.8 mph · 19 km/h12.4 mph · 20 km/h+5% KB 25
Clutch declaredPedal operated dry single plate clutchSingle-disc dry clutch from Fichtel & Sachsdiffers
Hydraulics & hitch
Pump flow declared—4.2 gpm · 16 L/min—
Pressure declared—1,707 psi · 118 bar—
Rear PTO speeds declared540 rpm405/710/1089 rpmdiffers
Weight & dimensions
Unladen weight declared3,386 lb · 1,536 kg3,307 lb · 1,500 kg—
Wheelbase declared70.0 in · 1,779 mm72.2 in · 1,835 mm—
Length declared108.3 in · 2,750 mm114.2 in · 2,900 mm+5% KB 25
Width declared64.6 in · 1,640 mm62.2 in · 1,580 mm—
Height, over the steering wheel declared61.0 in · 1,550 mm61.8 in · 1,570 mm—
Ground clearance declared15.1 in · 383 mm15.0 in · 380 mm—
Turning radius, braked declared9.2 ft · 2.80 m——
Fuel tank declared31.7 qt · 30.0 L21.1 qt · 20 L+50% D-324 Standard

International Harvester D-324 Standard sources

Source
  • Source: Traktorenlexikon, “McCormick D-324 Standard”
  • Source: Traktorenlexikon, “McCormick D-324 Farmall”

Kramer KB 25 sources

Source
  • Source: Traktorenlexikon, “Kramer KB 25”
  • Source: Traktorenlexikon, “Kramer KB 22 W”