7 material differences · fewer than 12
Tractor oneInternational Harvester D-324 Standard1958–1962No measured PTO figureTractor twoKramer KB 25 L1954–1955No measured PTO figure
Which should you choose?
Read our verdict on the D-324 Standard and the KB 25 L → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D-324 Standard | KB 25 L | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 23.7 hp | 23.6 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DD-111 | MWM AKD 12 Z | differs |
| Displacement declared | 1.83 L | 1.81 L | — |
| Maximum torque declared | 73 lb·ft · 99 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 12.4 mph · 20 km/h | +5% KB 25 L |
| Clutch declared | Pedal operated dry single plate clutch | Single plate dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.2 gpm · 16.0 L/min | — |
| Pressure declared | — | 1,707 psi · 118 bar | — |
| Rear PTO speeds declared | 540 rpm | 586 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,386 lb · 1,536 kg | 3,208 lb · 1,455 kg | +6% D-324 Standard |
| Wheelbase declared | 70.0 in · 1,779 mm | 73.6 in · 1,870 mm | — |
| Length declared | 108.3 in · 2,750 mm | 115.6 in · 2,935 mm | +7% KB 25 L |
| Width declared | 64.6 in · 1,640 mm | 62.2 in · 1,580 mm | — |
| Height, over the steering wheel declared | 61.0 in · 1,550 mm | 61.8 in · 1,570 mm | — |
| Ground clearance declared | 15.1 in · 383 mm | 15.0 in · 380 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | — | — |
| Fuel tank declared | 31.7 qt · 30.0 L | 38.0 qt · 36 L | +20% KB 25 L |
International Harvester D-324 Standard sources
Source
- Source: Traktorenlexikon, “McCormick D-324 Standard”
- Source: Traktorenlexikon, “McCormick D-324 Farmall”
Kramer KB 25 L sources
Source
- Source: Traktorenlexikon, “Kramer KB 25 L”