9 material differences · fewer than 12
Tractor oneInternational Harvester D-217 Standard1956–1962No measured PTO figureTractor twoMAN 2K11957–1958No measured PTO figure
Which should you choose?
Read our verdict on the D-217 Standard and the 2K1 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D-217 Standard | 2K1 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 16.8 hp | 17.7 hp | +6% 2K1 |
| Engine declared | INTERNATIONAL-HARVESTER DD-74 | MAN/Güldner D 8515 M 172 | differs |
| Displacement declared | 1.22 L | 1.30 L | +7% 2K1 |
| Maximum torque declared | — | 54 lb·ft · 74 N·m | — |
| Transmission | |||
| Top speed declared | 11.2 mph · 18 km/h | 12.4 mph · 20 km/h | +11% 2K1 |
| Clutch declared | — | Single-plate dry clutch from Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.0 gpm · 19.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,612 lb · 1,185 kg | 2,723 lb · 1,235 kg | — |
| Wheelbase declared | 68.1 in · 1,730 mm | 78.3 in · 1,990 mm | +15% 2K1 |
| Length declared | 105.2 in · 2,672 mm | 115.7 in · 2,940 mm | +10% 2K1 |
| Width declared | 62.2 in · 1,581 mm | 58.3 in · 1,480 mm | +7% D-217 Standard |
| Ground clearance declared | 13.9 in · 354 mm | 18.1 in · 460 mm | +30% 2K1 |
| Turning radius, braked declared | 8.0 ft · 2.45 m | 8.5 ft · 2.60 m | +6% 2K1 |
| Fuel tank declared | 28.5 qt · 27 L | 26.4 qt · 25 L | +8% D-217 Standard |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester D-217 Standard sources
- Source: Traktorenlexikon, “McCormick D-217 Standard”
- Source: Traktorenlexikon, “McCormick D-217 Farmall”
MAN 2K1 sources
- Source: Traktorenlexikon, “MAN 2K1”