International Harvester D-215 vs MASSEY-HARRIS Pony 811/812

10 material differences · fewer than 12

Tractor one

International Harvester D-215

1962–1964

No measured PTO figure

Tractor two

MASSEY-HARRIS Pony 811/812

1951–1957

No measured PTO figure

Which should you choose?

Read our verdict on the D-215 and the Pony 811/812 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 1 fields identical or within 5%, which is not counted as material

International Harvester D-215 and MASSEY-HARRIS Pony 811/812, field by field
FieldD-215Pony 811/812Gap
Engine
Engine power, claimed claimed15 hp15.6 hp+5% Pony 811/812
Engine declaredINTERNATIONAL-HARVESTER DD-66SIMCA 702differs
Displacement declared1.09 L
Maximum torque declared38 lb·ft · 51 N·m
Transmission
Top speed declared11.8 mph · 19 km/h10.6 mph · 17 km/h+12% D-215
Clutch declaredPedal operated dry single plate clutch
Hydraulics & hitch
Pump flow declared5.2 gpm · 19.5 L/min2.5 gpm · 9.5 L/min+105% D-215
Three-point lift at ends declared661 lb · 300 kg
Rear PTO speeds declared540 rpm534 rpmdiffers
Weight & dimensions
Unladen weight declared2,619 lb · 1,188 kg1,889 lb · 857 kg+39% D-215
Maximum permissible mass declared4,299 lb · 1,950 kg
Wheelbase declared68.1 in · 1,730 mm66.0 in · 1,676 mm
Length declared105.2 in · 2,672 mm99.2 in · 2,520 mm+6% D-215
Width declared62.2 in · 1,581 mm56.0 in · 1,422 mm+11% D-215
Height declared54.2 in · 1,376 mm60.0 in · 1,524 mm+11% Pony 811/812
Ground clearance declared13.9 in · 352 mm21.3 in · 540 mm+53% Pony 811/812
Turning radius, braked declared8.0 ft · 2.45 m
Fuel tank declared28.5 qt · 27.0 L31.7 qt · 30.0 L+11% Pony 811/812

International Harvester D-215 sources

Source
  • Source: Traktorenlexikon, “McCormick D-215”
  • Source: Traktorenlexikon, “McCormick DLD 2”

MASSEY-HARRIS Pony 811/812 sources

Source
  • Source: Traktorenlexikon, “Massey-Harris Massey-Harris Pony 811/812”