International Harvester 624 (A) vs ZETOR 7011/7045

11 material differences · fewer than 12

Tractor one

1965–1972

No measured PTO figure

Tractor two

1980–1984

No measured PTO figure

Which should you choose?

Read our verdict on the 624 (A) and the 7011/7045 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester 624 (A) and ZETOR 7011/7045, field by field
Field	624 (A)	7011/7045	Gap
Engine
Engine power, claimed claimed	57.3 hp	64.1 hp	+12% 7011/7045
Engine declared	INTERNATIONAL-HARVESTER D-206	ZBROJORKA Z-7001	differs
Displacement declared	3.38 L	3.60 L	+6% 7011/7045
Maximum torque declared	151 lb·ft · 205 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	12.4–15.5 mph · 20–25 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated dry Fichtel & Sachs single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	7.5 gpm · 28.3 L/min	6.0 gpm · 22.9 L/min	+24% 624 (A)
Pressure declared	3,553 psi · 245 bar	3,336 psi · 230 bar	+7% 624 (A)
Three-point lift at ends declared	3,748 lb · 1,700 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,575 lb · 2,529 kg	6,460 lb · 2,930 kg	+16% 7011/7045
Wheelbase declared	83.5 in · 2,120 mm	88.5 in · 2,247 mm	+6% 7011/7045
Length declared	139.0 in · 3,530 mm	146.5 in · 3,720 mm	+5% 7011/7045
Width declared	71.5 in · 1,815 mm	72.8 in · 1,850 mm	—
Height declared	95.2 in · 2,419 mm	104.3 in · 2,650 mm	+10% 7011/7045
Ground clearance declared	16.5 in · 419 mm	19.3 in · 490 mm	+17% 7011/7045
Turning radius, braked declared	12.0 ft · 3.65 m	11.7 ft · 3.57 m	—
Fuel tank declared	74.0 qt · 70.0 L	74.0 qt · 70.0 L	—

Source

Source