International Harvester 423 (MC Cormick-International) vs Steyr 288

9 material differences · fewer than 12

Tractor one

1966–1975

No measured PTO figure

Tractor two

1962–1966

No measured PTO figure

Which should you choose?

Read our verdict on the 423 and the 288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 423 (MC Cormick-International) and Steyr 288, field by field
Field	423	288	Gap
Engine
Engine power, claimed claimed	39.4 hp	44.4 hp	+13% 288
Engine declared	INTERNATIONAL-HARVESTER D-155	Steyr WD-406	differs
Displacement declared	2.54 L	2.66 L	—
Maximum torque declared	125 lb·ft · 169 N·m	116 lb·ft · 157 N·m	+8% 423
Transmission
Top speed declared	12.4 mph · 20 km/h	18.6 mph · 30 km/h	+50% 288
Clutch declared	—	Pedal-operated dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Pump flow declared	6.7 gpm · 25.5 L/min	8.5 gpm · 32.0 L/min	+25% 288
Pressure declared	3,553 psi · 245 bar	2,134 psi · 147 bar	+67% 423
Three-point lift at ends declared	—	3,527 lb · 1,600 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,442 lb · 2,015 kg	4,255 lb · 1,930 kg	—
Wheelbase declared	75.6 in · 1,920 mm	79.3 in · 2,015 mm	—
Length declared	133.5 in · 3,390 mm	135.2 in · 3,435 mm	—
Width declared	59.9 in · 1,522 mm	66.5 in · 1,690 mm	+11% 288
Height declared	56.7 in · 1,441 mm	56.9 in · 1,444 mm	—
Ground clearance declared	14.3 in · 363 mm	16.1 in · 410 mm	+13% 288
Turning radius, braked declared	10.6 ft · 3.22 m	—	—
Fuel tank declared	63.4 qt · 60.0 L	77.1 qt · 73.0 L	+22% 288

Source

Source