10 material differences · fewer than 12
Tractor oneIMT 577 (DV)1981–1993No measured PTO figureTractor twoLeyland 2621975–1980No measured PTO figure
Which should you choose?
Read our verdict on the 577 (DV) and the 262 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 577 (DV) | 262 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 62.1 hp | +11% 577 (DV) |
| Engine declared | IMR-PERKINS S-44 A/T (A 4.248) | LEYLAND-MOTORS 4/98 DT | differs |
| Displacement declared | 4.07 L | 3.77 L | +8% 577 (DV) |
| Maximum torque declared | 194 lb·ft · 263 N·m | 165 lb·ft · 224 N·m | +17% 577 (DV) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry two stage KRON NOVI double clutch | Dry Borg & Beck double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.9 gpm · 22.3 L/min | 8.3 gpm · 31.3 L/min | +40% 262 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,482 lb · 2,940 kg | 6,724 lb · 3,050 kg | — |
| Wheelbase declared | 87.2 in · 2,215 mm | 80.0 in · 2,032 mm | +9% 577 (DV) |
| Length declared | 144.5 in · 3,670 mm | 146.9 in · 3,730 mm | — |
| Width declared | 68.9–87.4 in · 1,750–2,220 mm | 78.7 in · 2,000 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 14.8 in · 377 mm | +27% 577 (DV) |
| Turning radius, braked declared | 14.1 ft · 4.29 m | 10.5 ft · 3.19 m | +34% 577 (DV) |
| Fuel tank declared | 95.1 qt · 90.0 L | 72.1 qt · 68.2 L | +32% 577 (DV) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
IMT 577 (DV) sources
- Source: Traktorenlexikon, “IMT 577”
Leyland 262 sources
- Source: Traktorenlexikon, “Leyland 262”
- Source: Traktorenlexikon, “Leyland 255”