IMT 560 vs Steyr 948 (a)
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 560 and the 948 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 560 | 948 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 47.3 hp | +21% 560 |
| Engine declared | IMT-PERKINS M-34/T | Steyr WD 308.85 | differs |
| Displacement declared | 3.33 L | 2.36 L | +41% 560 |
| Maximum torque declared | 144 lb·ft · 195 N·m | 108 lb·ft · 147 N·m | +33% 560 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry two-stage double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Three-point lift at ends declared | 3,869 lb · 1,755 kg | 4,012 lb · 1,820 kg | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,445 lb · 2,470 kg | 5,093 lb · 2,310 kg | +7% 560 |
| Maximum permissible mass declared | — | 7,716 lb · 3,500 kg | — |
| Wheelbase declared | 87.0 in · 2,210 mm | 77.5 in · 1,968 mm | +12% 560 |
| Length declared | 156.5 in · 3,975 mm | 129.5 in · 3,290 mm | +21% 560 |
| Width declared | 69.3 in · 1,760 mm | 68.5 in · 1,740 mm | — |
| Height declared | 87.0 in · 2,210 mm | 90.2 in · 2,290 mm | — |
| Ground clearance declared | 17.1 in · 434 mm | 17.5 in · 445 mm | — |
| Turning radius, braked declared | 13.2 ft · 4.03 m | 10.5 ft · 3.19 m | +26% 560 |
| Fuel tank declared | 95.1–116.2 qt · 90.0–110.0 L | 56.0 qt · 53.0 L | differs |
IMT 560 sources
Source
- Source: Traktorenlexikon, “IMT 560”
Steyr 948 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 948”