9 material differences · fewer than 12
Tractor oneIMT 542from 1986No measured PTO figureTractor twoMassey Ferguson MF 3501987–1994No measured PTO figure
Which should you choose?
Read our verdict on the 542 and the MF 350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 542 | MF 350 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.4 hp | 46.4 hp | +12% MF 350 |
| Engine declared | IMT-PERKINS M-33/T | Perkins AD 3.152 | differs |
| Displacement declared | 2.50 L | 2.50 L | — |
| Maximum torque declared | 106 lb·ft · 144 N·m | 128 lb·ft · 174 N·m | +21% MF 350 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry two-stage KRON-NOVI double clutch | Pedal operated, dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | 5.0 gpm · 19.0 L/min | — |
| Pressure declared | 2,683 psi · 185 bar | 2,466 psi · 170 bar | +9% 542 |
| Rear PTO speeds declared | 540 rpm | 540/1789 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,001 lb · 1,815 kg | 5,796 lb · 2,629 kg | +45% MF 350 |
| Wheelbase declared | 76.8 in · 1,950 mm | 82.0 in · 2,083 mm | +7% MF 350 |
| Length declared | 135.4 in · 3,440 mm | 137.4 in · 3,490 mm | — |
| Width declared | 66.9 in · 1,700 mm | 70.1 in · 1,780 mm | — |
| Ground clearance declared | 13.5 in · 342 mm | 8.8 in · 224 mm | +53% 542 |
| Turning radius, braked declared | 10.5 ft · 3.21 m | — | — |
| Fuel tank declared | 52.8 qt · 50.0 L | 71.9 qt · 68 L | +36% MF 350 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
IMT 542 sources
Source
- Source: Traktorenlexikon, “IMT 542”
- Source: Traktorenlexikon, “IMT 540”
Massey Ferguson MF 350 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 350”
- Source: Traktorenlexikon, “Massey Ferguson MF 148”