8 material differences · fewer than 12
Tractor oneHürlimann Prince 445 DT1995–1999No measured PTO figureTractor twoSteyr 8045 (a)1988–1990No measured PTO figure
Which should you choose?
Read our verdict on the Prince 445 DT and the 8045 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Prince 445 DT | 8045 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.4 hp | 41.4 hp | — |
| Engine declared | MITSUBISHI K4 F-D Turbo | Steyr WD 308.48 | differs |
| Displacement declared | 1.49 L | 2.36 L | +58% 8045 (a) |
| Maximum torque declared | — | 111 lb·ft · 150 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 1.8 gpm · 7.0 L/min | — | — |
| Pressure declared | — | 3,553 psi · 245 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,734 lb · 1,240 kg | 4,189 lb · 1,900 kg | +53% 8045 (a) |
| Wheelbase declared | 66.9 in · 1,700 mm | 74.8 in · 1,899 mm | +12% 8045 (a) |
| Length declared | 119.3 in · 3,030 mm | 130.9 in · 3,324 mm | +10% 8045 (a) |
| Width declared | 49.6–53.5 in · 1,260–1,360 mm | 66.1 in · 1,679 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 16.3 in · 415 mm | +6% 8045 (a) |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 10.5 ft · 3.21 m | — |
| Fuel tank declared | 30.6 qt · 29.0 L | 56.0 qt · 53.0 L | +83% 8045 (a) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann Prince 445 DT sources
- Source: Traktorenlexikon, “Hürlimann Prince 445”
Steyr 8045 (a) sources
- Source: Traktorenlexikon, “Steyr 8045”
- Source: Traktorenlexikon, “Steyr 942”