9 material differences · fewer than 12
Tractor oneHürlimann Prince 445 DT1995–1999No measured PTO figureTractor twoMassey Ferguson MF 340 (A)1988–1994No measured PTO figure
Which should you choose?
Read our verdict on the Prince 445 DT and the MF 340 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Prince 445 DT | MF 340 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.4 hp | 41.4 hp | — |
| Engine declared | MITSUBISHI K4 F-D Turbo | Perkins AD 3.152 | differs |
| Displacement declared | 1.49 L | 2.50 L | +68% MF 340 (A) |
| Maximum torque declared | — | 124 lb·ft · 168 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal operated, dry and air-cooled double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 1.8 gpm · 7.0 L/min | 5.2 gpm · 19.5 L/min | +179% MF 340 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,734 lb · 1,240 kg | 5,203 lb · 2,360 kg | +90% MF 340 (A) |
| Wheelbase declared | 66.9 in · 1,700 mm | 81.9 in · 2,080 mm | +22% MF 340 (A) |
| Length declared | 119.3 in · 3,030 mm | 137.2 in · 3,485 mm | +15% MF 340 (A) |
| Width declared | 49.6–53.5 in · 1,260–1,360 mm | 70.7 in · 1,795 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | — | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 10.5 ft · 3.21 m | — |
| Fuel tank declared | 30.6 qt · 29.0 L | 71.9 qt · 68.0 L | +134% MF 340 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann Prince 445 DT sources
- Source: Traktorenlexikon, “Hürlimann Prince 445”
Massey Ferguson MF 340 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 340”
- Source: Traktorenlexikon, “Massey Ferguson MF 148”