Hürlimann SX 2000 vs John Deere 8110

10 material differences · fewer than 12

Tractor one

2000–2004

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the SX 2000 and the 8110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann SX 2000 and John Deere 8110, field by field
Field	SX 2000	8110	Gap
Engine
Engine power, claimed claimed	192.3 hp	192.4 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.6 WTI-3V	John Deere-PowerTech 6.081 HRW-11	differs
Displacement declared	6.00 L	8.13 L	+36% 8110
Maximum torque declared	575 lb·ft · 780 N·m	586 lb·ft · 794 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulically operated wet multi-disc clutch	Pedal operated hydraulic wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	31.8 gpm · 120.4 L/min	—
Pressure declared	2,176 psi · 150 bar	2,683 psi · 185 bar	+23% 8110
Three-point lift at ends declared	22,046 lb · 10,000 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	15,873 lb · 7,200 kg	19,346 lb · 8,775 kg	+22% 8110
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	112.2 in · 2,850 mm	116.1 in · 2,950 mm	—
Length declared	191.4 in · 4,861 mm	216.0 in · 5,487 mm	+13% 8110
Width declared	95.5 in · 2,426 mm	118.6 in · 3,012 mm	+24% 8110
Height declared	116.9 in · 2,970 mm	121.7 in · 3,090 mm	—
Ground clearance declared	23.4 in · 594 mm	16.5 in · 420 mm	+41% SX 2000
Fuel tank declared	422.7 qt · 400.0 L	540.0 qt · 511.0 L	+28% 8110

Source

Source