Hürlimann SX 1350 or New Holland 8360 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the SX 1350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8360 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Hürlimann SX 1350 suits loader and hydraulic implement work better on this data: 12% (11.7 L/min / 3.1 gpm) more hydraulic flow.
  • The Hürlimann SX 1350 suits road haulage better on this data: 17% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann SX 1350 and New Holland 8360 A, with the call on each
QuestionSX 13508360 ACall
Which puts more power through the PTO shaft?99.3 kW (133.2 hp)Traktorenlexikon, “Hürlimann SX 1350”99.3 kW (133.2 hp)Traktorenlexikon, “New Holland 8360”Not comparableNot comparable on power at the PTO shaft: the SX 1350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8360 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the SX 1350 and the 8360 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the SX 1350 and the 8360 A.
Which pumps more oil for implements?109.0 L/min (28.8 gpm)Traktorenlexikon, “Hürlimann SX 1350”97.3 L/min (25.7 gpm)Traktorenlexikon, “New Holland 8360”AheadThe Hürlimann SX 1350 has 12% more hydraulic flow (11.7 L/min / 3.1 gpm) than the New Holland 8360A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?7,000 kg (15,432 lb)Traktorenlexikon, “Hürlimann SX 1350”5,060 kg (11,155 lb)Traktorenlexikon, “New Holland 8360”Not comparableNot comparable on three-point lift: the SX 1350: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann SX 1350”); the 8360 A: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 8360”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,700 kg (14,771 lb)Traktorenlexikon, “Hürlimann SX 1350”5,925 kg (13,062 lb)Traktorenlexikon, “New Holland 8360”Ahead (a fact, not an advantage)The Hürlimann SX 1350 is 13% heavier (775 kg / 1,709 lb) than the New Holland 8360A (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,500 kg (23,149 lb)Traktorenlexikon, “Hürlimann SX 1350”9,000 kg (19,842 lb)Traktorenlexikon, “New Holland 8360”AheadThe Hürlimann SX 1350 has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the New Holland 8360A (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18 to 27Traktorenlexikon, “Hürlimann SX 1350”18 to 24Traktorenlexikon, “New Holland 8360”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the SX 1350 and the 8360 A.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann SX 1350”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland 8360”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann SX 1350”540/1000 rpmTraktorenlexikon, “New Holland 8360”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann SX 1350”independentTraktorenlexikon, “New Holland 8360”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann SX 1350”4WDTraktorenlexikon, “New Holland 8360”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20041996–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann SX 1350 has 12% more hydraulic flow (11.7 L/min / 3.1 gpm) than the New Holland 8360A (both pump flow, as stated by the source).
  • The Hürlimann SX 1350 is 13% heavier (775 kg / 1,709 lb) than the New Holland 8360A (both unladen weight, as stated by the source).
  • The Hürlimann SX 1350 has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the New Holland 8360A (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the SX 1350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8360 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the SX 1350: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann SX 1350”); the 8360 A: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 8360”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources