13 material differences
Tractor oneHürlimann SX 13501998–2004No measured PTO figureTractor twoNew Holland 8360 A1996–1999No measured PTO figure
Which should you choose?
Read our verdict on the SX 1350 and the 8360 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | SX 1350 | 8360 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.2 hp | 133.2 hp | — |
| Engine declared | SAME-DEUTZ-FAHR 1000.6 WT-3 V1 | NEW HOLLAND 675 T-WL | differs |
| Displacement declared | 6.00 L | 7.48 L | +25% 8360 A |
| Maximum torque declared | 358 lb·ft · 485 N·m | 420 lb·ft · 569 N·m | +17% 8360 A |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulic wet multi-disc clutch | Electro-hydraulic wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.8 gpm · 109.0 L/min | 25.7 gpm · 97.3 L/min | +12% SX 1350 |
| Pressure declared | 3,046 psi · 210 bar | 2,799 psi · 193 bar | +9% SX 1350 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,771 lb · 6,700 kg | 13,062 lb · 5,925 kg | +13% SX 1350 |
| Maximum permissible mass declared | 23,149 lb · 10,500 kg | 19,842 lb · 9,000 kg | +17% SX 1350 |
| Wheelbase declared | 108.3 in · 2,750 mm | 107.2 in · 2,723 mm | — |
| Length declared | 170.1 in · 4,320 mm | 184.6 in · 4,690 mm | +9% 8360 A |
| Width declared | 96.5–112.6 in · 2,450–2,860 mm | 95.3 in · 2,420 mm | differs |
| Ground clearance declared | 20.5 in · 520 mm | 15.0 in · 380 mm | +37% SX 1350 |
| Fuel tank declared | 243.0–401.5 qt · 230.0–380.0 L | 232.5 qt · 220.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann SX 1350 sources
Source
- Source: Traktorenlexikon, “Hürlimann SX 1350”
New Holland 8360 A sources
Source
- Source: Traktorenlexikon, “New Holland 8360”