Hürlimann Prince 435 DT vs Massey Ferguson MF 350

13 material differences

Tractor one

1995–1999

No measured PTO figure

Tractor two

1987–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Prince 435 DT and the MF 350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Hürlimann Prince 435 DT and Massey Ferguson MF 350, field by field
Field	Prince 435 DT	MF 350	Gap
Engine
Engine power, claimed claimed	34.6 hp	46.4 hp	+34% MF 350
Engine declared	MITSUBISHI K4 F-D	Perkins AD 3.152	differs
Displacement declared	1.49 L	2.50 L	+68% MF 350
Maximum torque declared	—	128 lb·ft · 174 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry SDF single-disc clutch	Pedal operated, dry and air-cooled double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	1.4 gpm · 5.3 L/min	5.0 gpm · 19.0 L/min	+258% MF 350
Pressure declared	2,901 psi · 200 bar	2,466 psi · 170 bar	+18% Prince 435 DT
Three-point lift at ends declared	—	4,079 lb · 1,850 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1789 rpm	differs
Weight & dimensions
Unladen weight declared	2,601 lb · 1,180 kg	5,796 lb · 2,629 kg	+123% MF 350
Wheelbase declared	64.2 in · 1,630 mm	82.0 in · 2,083 mm	+28% MF 350
Length declared	116.5 in · 2,960 mm	137.4 in · 3,490 mm	+18% MF 350
Width declared	40.2 in · 1,020 mm	70.1 in · 1,780 mm	+75% MF 350
Height declared	78.7 in · 2,000 mm	89.4 in · 2,270 mm	+14% MF 350
Ground clearance declared	14.2 in · 360 mm	8.8 in · 224 mm	+61% Prince 435 DT
Turning radius, braked declared	9.0 ft · 2.73 m	—	—
Fuel tank declared	30.6 qt · 29.0 L	71.9 qt · 68 L	+134% MF 350

Source

Source