Hürlimann H-5116 T (A) vs VALMET 8050

11 material differences · fewer than 12

Tractor one

1984–1989

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the H-5116 T (A) and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-5116 T (A) and VALMET 8050, field by field
Field	H-5116 T (A)	8050	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	HÜRLIMANN H-1105/11-Turbo	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	5.70 L	6.59 L	+16% 8050
Maximum torque declared	302 lb·ft · 410 N·m	340 lb·ft · 461 N·m	+12% 8050
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal operated dry single plate clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	—	18.8 gpm · 71.0 L/min	—
Three-point lift at ends declared	10,340 lb · 4,690 kg	14,110 lb · 6,400 kg	+36% 8050
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,259 lb · 4,200 kg	10,450 lb · 4,740 kg	+13% 8050
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	108.9 in · 2,767 mm	100.7 in · 2,558 mm	+8% H-5116 T (A)
Length declared	166.6 in · 4,231 mm	187.3 in · 4,757 mm	+12% 8050
Width declared	83.5 in · 2,120 mm	84.8 in · 2,155 mm	—
Height declared	106.1 in · 2,695 mm	108.3 in · 2,750 mm	—
Ground clearance declared	26.0 in · 660 mm	18.7 in · 475 mm	+39% H-5116 T (A)
Turning radius, braked declared	11.2 ft · 3.40 m	—	—
Fuel tank declared	137.4 qt · 130.0 L	174.4 qt · 165.0 L	+27% 8050

Source

Source