Hürlimann H-86 XA vs VALMET 6300-4

12 material differences

Tractor one

from 2005

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the H-86 XA and the 6300-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Hürlimann H-86 XA and VALMET 6300-4, field by field
Field	H-86 XA	6300-4	Gap
Engine
Engine power, claimed claimed	82 hp	83.8 hp	—
Engine declared	Hürlimann 1000.4 WT-6 E	VALMET 420 DS/420 DSRE/44 DT	differs
Displacement declared	4.00 L	4.40 L	+10% 6300-4
Maximum torque declared	235 lb·ft · 318 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SDF single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	12.7 gpm · 48.0 L/min	18.4 gpm · 69.5 L/min	+45% 6300-4
Three-point lift at ends declared	—	9,601 lb · 4,355 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,967 lb · 3,160 kg	8,973 lb · 4,070 kg	+29% 6300-4
Maximum permissible mass declared	11,023 lb · 5,000 kg	14,330 lb · 6,500 kg	+30% 6300-4
Wheelbase declared	86.0 in · 2,185 mm	91.7 in · 2,330 mm	+7% 6300-4
Length declared	155.5 in · 3,950 mm	174.2 in · 4,425 mm	+12% 6300-4
Width declared	80.7 in · 2,050 mm	79.1 in · 2,010 mm	—
Height declared	96.9 in · 2,460 mm	106.9 in · 2,715 mm	+10% 6300-4
Ground clearance declared	15.0 in · 380 mm	17.1 in · 435 mm	+14% 6300-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	95.1 qt · 90.0 L	167.0 qt · 158.0 L	+76% 6300-4

Source

Source