14 material differences
Tractor oneHürlimann H-80 XA2009–2014No measured PTO figureTractor twoJohn Deere 61302006–2012No measured PTO figure
Which should you choose?
Read our verdict on the H-80 XA and the 6130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | H-80 XA | 6130 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 81.0 hp | — |
| Engine declared | Hürlimann 1000.3 WTI | John Deere PowrTech 4.045 TI/V2-CR | differs |
| Displacement declared | 3.00 L | 4.53 L | +51% 6130 |
| Maximum torque declared | 229 lb·ft · 310 N·m | 294 lb·ft · 399 N·m | +29% 6130 |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | electrohydraulically actuated wet SDF multi-disc clutch switchable under load | Pedal-operated hydraulic wet Perma-Clutch II multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 8.4 gpm · 31.9 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | 2,785–3,002 psi · 192–207 bar | differs |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,393 lb · 2,900 kg | 10,472 lb · 4,750 kg | +64% 6130 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | 16,755 lb · 7,600 kg | +52% 6130 |
| Wheelbase declared | 86.0 in · 2,185 mm | 94.5 in · 2,400 mm | +10% 6130 |
| Length declared | 140.2 in · 3,560 mm | 168.9 in · 4,289 mm | +20% 6130 |
| Width declared | 75.6–91.3 in · 1,920–2,320 mm | 89.6 in · 2,275 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 17.7 in · 450 mm | +25% 6130 |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 95.1 qt · 90.0 L | 174.4 qt · 165.0 L | +83% 6130 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-80 XA sources
Source
- Source: Traktorenlexikon, “Hürlimann XA 80”
John Deere 6130 sources
Source
- Source: Traktorenlexikon, “John Deere 6130”