Hürlimann H-6190 Master vs Massey Ferguson MF 2775

7 material differences · fewer than 12

Tractor one

1992–2001

No measured PTO figure

Tractor two

1977–1983

No measured PTO figure

Which should you choose?

Read our verdict on the H-6190 Master and the MF 2775 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-6190 Master and Massey Ferguson MF 2775, field by field
Field	H-6190 Master	MF 2775	Gap
Engine
Engine power, claimed claimed	186 hp	187.3 hp	—
Engine declared	SAME-LAMBORGHINI-HÜRLIMANN 1000.6 WTIR	Perkins AV 8.640	differs
Displacement declared	6.00 L	10.50 L	+75% MF 2775
Maximum torque declared	500 lb·ft · 678 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	22.1 mph · 35.5 km/h	+13% H-6190 Master
Clutch declared	Pedal-operated electrohydraulic wet multi-disc clutch	Dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Constant flow	differs
Pump flow declared	16.1 gpm · 60.8 L/min	14.5 gpm · 55.0 L/min	+11% H-6190 Master
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	18,960 lb · 8,600 kg	—	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,228 lb · 6,000 kg	13,312 lb · 6,038 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	—	—
Wheelbase declared	112.2 in · 2,850 mm	109.8 in · 2,790 mm	—
Length declared	188.2 in · 4,780 mm	190.0 in · 4,826 mm	—
Width declared	97.2 in · 2,470 mm	—	—
Height declared	115.4 in · 2,930 mm	112.2 in · 2,850 mm	—
Ground clearance declared	21.7 in · 550 mm	—	—
Turning radius, braked declared	12.8 ft · 3.90 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	—	—

Source

Source