Hürlimann H-6160 A vs Steyr 8170 a

9 material differences · fewer than 12

Tractor one

1979–1983

No measured PTO figure

Tractor two

1980–1986

No measured PTO figure

Which should you choose?

Read our verdict on the H-6160 A and the 8170 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Hürlimann H-6160 A and Steyr 8170 a, field by field
Field	H-6160 A	8170 a	Gap
Engine
Engine power, claimed claimed	155.7 hp	148.0 hp	—
Engine declared	Hürlimann H-1106/15-Turbo	Steyr WD 612.89	differs
Displacement declared	6.84 L	6.60 L	—
Maximum torque declared	471 lb·ft · 638 N·m	451 lb·ft · 612 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5–18.6 mph · 25–30 km/h	differs
Hydraulics & hitch
Pump flow declared	15.3 gpm · 58.0 L/min	11.1 gpm · 42.0 L/min	+38% H-6160 A
Pressure declared	2,277 psi · 157 bar	3,553 psi · 245 bar	+56% 8170 a
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,220 lb · 6,450 kg	13,281 lb · 6,024 kg	+7% H-6160 A
Maximum permissible mass declared	20,503 lb · 9,300 kg	17,637 lb · 8,000 kg	+16% H-6160 A
Wheelbase declared	112.5 in · 2,857 mm	106.3 in · 2,700 mm	+6% H-6160 A
Length declared	175.2 in · 4,450 mm	196.1 in · 4,980 mm	+12% 8170 a
Width declared	92.5 in · 2,350 mm	92.1 in · 2,340 mm	—
Height declared	115.0 in · 2,920 mm	108.3 in · 2,750 mm	+6% H-6160 A
Ground clearance declared	19.3 in · 490 mm	18.9 in · 480 mm	—
Turning radius, braked declared	—	16.2 ft · 4.95 m	—
Fuel tank declared	253.6 qt · 240.0 L	253.6 qt · 240.0 L	—

Source

Source