9 material differences · fewer than 12
Tractor oneHürlimann H-6160 A1979–1983No measured PTO figureTractor twoInternational Harvester 41561969–1970No measured PTO figure
Which should you choose?
Read our verdict on the H-6160 A and the 4156 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | H-6160 A | 4156 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 155.7 hp | 138 hp | +13% H-6160 A |
| Engine declared | Hürlimann H-1106/15-Turbo | INTERNATIONAL HARVESTER DT-429 | differs |
| Displacement declared | 6.84 L | 7.04 L | — |
| Maximum torque declared | 471 lb·ft · 638 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 4156 |
| Clutch declared | — | Pedal operated dry single plate clutch type 14 inches | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.3 gpm · 58.0 L/min | 16.5 gpm · 62.5 L/min | +8% 4156 |
| Pressure declared | 2,277 psi · 157 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,220 lb · 6,450 kg | 15,174 lb · 6,883 kg | +7% 4156 |
| Maximum permissible mass declared | 20,503 lb · 9,300 kg | — | — |
| Wheelbase declared | 112.5 in · 2,857 mm | 102.0 in · 2,590 mm | +10% H-6160 A |
| Length declared | 175.2 in · 4,450 mm | 194.0 in · 4,928 mm | +11% 4156 |
| Width declared | 92.5 in · 2,350 mm | 95.7 in · 2,430 mm | — |
| Ground clearance declared | 19.3 in · 490 mm | 17.3 in · 440 mm | +11% H-6160 A |
| Fuel tank declared | 253.6 qt · 240.0 L | 400.0 qt · 378.5 L | +58% 4156 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-6160 A sources
- Source: Traktorenlexikon, “Hürlimann H 6160”
International Harvester 4156 sources
- Source: Traktorenlexikon, “IHC 4156”
- Source: Traktorenlexikon, “IHC 4100”