Hürlimann H-6130 A vs SAME Buffalo 130 (DT)

10 material differences · fewer than 12

Tractor one

1979–1982

No measured PTO figure

Tractor two

1978–1982

No measured PTO figure

Which should you choose?

Read our verdict on the H-6130 A and the Buffalo 130 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-6130 A and SAME Buffalo 130 (DT), field by field
Field	H-6130 A	Buffalo 130 (DT)	Gap
Engine
Engine power, claimed claimed	128.2 hp	122.3 hp	—
Engine declared	Hürlimann H-1106/12	SAME DA 1056 P	differs
Displacement declared	6.84 L	6.23 L	+10% H-6130 A
Maximum torque declared	358 lb·ft · 485 N·m	295 lb·ft · 400 N·m	+21% H-6130 A
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal operated dry BORG & BECK single plate clutch	—
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	9.2 gpm · 35.0 L/min	+11% H-6130 A
Three-point lift at ends declared	9,281 lb · 4,210 kg	10,071 lb · 4,568 kg	+9% Buffalo 130 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,677 lb · 5,750 kg	9,480 lb · 4,300 kg	+34% H-6130 A
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	112.5 in · 2,857 mm	104.7 in · 2,660 mm	+7% H-6130 A
Length declared	182.7 in · 4,640 mm	170.1 in · 4,320 mm	+7% H-6130 A
Width declared	87.8 in · 2,230 mm	85.4 in · 2,170 mm	—
Height declared	114.2 in · 2,900 mm	111.4 in · 2,830 mm	—
Ground clearance declared	17.3 in · 440 mm	20.9 in · 530 mm	+20% Buffalo 130 (DT)
Turning radius, braked declared	—	13.5 ft · 4.10 m	—
Fuel tank declared	243.0 qt · 230.0 L	147.9 qt · 140.0 L	+64% H-6130 A

Source

Source