Hürlimann H-6130 A vs J.I. Case 1090

9 material differences · fewer than 12

Tractor one

1979–1982

No measured PTO figure

Tractor two

1970

No measured PTO figure

Which should you choose?

Read our verdict on the H-6130 A and the 1090 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-6130 A and J.I. Case 1090, field by field
Field	H-6130 A	1090	Gap
Engine
Engine power, claimed claimed	128.2 hp	121.2 hp	+6% H-6130 A
Engine declared	Hürlimann H-1106/12	CASE A-451	differs
Displacement declared	6.84 L	7.39 L	+8% 1090
Maximum torque declared	358 lb·ft · 485 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	16.0 gpm · 60.6 L/min	+55% 1090
Three-point lift at ends declared	9,281 lb · 4,210 kg	—	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	12,677 lb · 5,750 kg	10,395 lb · 4,715 kg	+22% H-6130 A
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	112.5 in · 2,857 mm	108.0 in · 2,743 mm	—
Length declared	182.7 in · 4,640 mm	162.0 in · 4,115 mm	+13% H-6130 A
Width declared	87.8 in · 2,230 mm	88.0 in · 2,235 mm	—
Height declared	114.2 in · 2,900 mm	78.0 in · 1,981 mm	+46% H-6130 A
Ground clearance declared	17.3 in · 440 mm	15.0 in · 381 mm	+15% H-6130 A
Turning radius, braked declared	—	13.0 ft · 3.97 m	—
Fuel tank declared	243.0 qt · 230.0 L	200.0 qt · 189.3 L	+22% H-6130 A

Source

Source