Hürlimann H-6130 A vs International Harvester 3488-Hydro

8 material differences · fewer than 12

Tractor one

1979–1982

No measured PTO figure

Tractor two

1981–1985

No measured PTO figure

Which should you choose?

Read our verdict on the H-6130 A and the 3488-Hydro → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-6130 A and International Harvester 3488-Hydro, field by field
Field	H-6130 A	3488-Hydro	Gap
Engine
Engine power, claimed claimed	128.2 hp	112.4 hp	+14% H-6130 A
Engine declared	Hürlimann H-1106/12	INTERNATIONAL HARVESTER D-466	differs
Displacement declared	6.84 L	7.64 L	+12% 3488-Hydro
Maximum torque declared	358 lb·ft · 485 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 3488-Hydro
Clutch declared	—	Pedal operated Dyna-Life clutch	—
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	18.0 gpm · 68.1 L/min	+75% 3488-Hydro
Three-point lift at ends declared	9,281 lb · 4,210 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,677 lb · 5,750 kg	12,879 lb · 5,842 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	112.5 in · 2,857 mm	104.8 in · 2,662 mm	+7% H-6130 A
Length declared	182.7 in · 4,640 mm	184.0 in · 4,674 mm	—
Width declared	87.8 in · 2,230 mm	102.0 in · 2,591 mm	+16% 3488-Hydro
Height declared	114.2 in · 2,900 mm	112.0 in · 2,845 mm	—
Ground clearance declared	17.3 in · 440 mm	13.0 in · 330 mm	+33% H-6130 A
Turning radius, braked declared	—	11.7 ft · 3.58 m	—
Fuel tank declared	243.0 qt · 230.0 L	200.0 qt · 189.3 L	+22% H-6130 A

Source

Source