9 material differences · fewer than 12
Tractor oneHürlimann H-5110 (A)1979–1983No measured PTO figureTractor twoLandini 12.500 (DT)1978–1990No measured PTO figure
Which should you choose?
Read our verdict on the H-5110 (A) and the 12.500 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | H-5110 (A) | 12.500 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 108.5 hp | — |
| Engine declared | Hürlimann H-1105/10 or H-1105/10-Turbo | Perkins A 6.354 | differs |
| Displacement declared | 5.70 L | 5.80 L | — |
| Maximum torque declared | 292 lb·ft · 396 N·m | 276 lb·ft · 374 N·m | +6% H-5110 (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated dry SAME single-disc clutch | Pedal-operated dry LUK dual clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 16.4 gpm · 62.0 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,480–10,582 lb · 4,300–4,800 kg | 10,604 lb · 4,810 kg | differs |
| Maximum permissible mass declared | 16,094 lb · 7,300 kg | — | — |
| Wheelbase declared | 102.6–103.9 in · 2,607–2,640 mm | 111.8 in · 2,840 mm | differs |
| Length declared | 172.4 in · 4,380 mm | 184.6 in · 4,690 mm | +7% 12.500 (DT) |
| Width declared | 81.5–101.2 in · 2,070–2,570 mm | 97.2 in · 2,470 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 17.7 in · 450 mm | — |
| Fuel tank declared | 169.1 qt · 160.0 L | 190.2 qt · 180.0 L | +13% 12.500 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-5110 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 5110”
Landini 12.500 (DT) sources
- Source: Traktorenlexikon, “Landini 12500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”