Hürlimann H-496 Turbo (A) vs ZETOR 11641

8 material differences · fewer than 12

Tractor one

1984–1989

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the H-496 Turbo (A) and the 11641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann H-496 Turbo (A) and ZETOR 11641, field by field
Field	H-496 Turbo (A)	11641	Gap
Engine
Engine power, claimed claimed	93.6 hp	108.5 hp	+16% 11641
Engine declared	Hürlimann H-1104/9 WT	SDF 1000.6 W or 1000.6 W 2T	differs
Displacement declared	4.56 L	6.00 L	+32% 11641
Maximum torque declared	266 lb·ft · 360 N·m	288 lb·ft · 390 N·m	+8% 11641
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry Zetor single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	18.0 gpm · 68.0 L/min	17.2 gpm · 65.0 L/min	—
Pressure declared	2,654 psi · 183 bar	1,813 psi · 125 bar	+46% H-496 Turbo (A)
Three-point lift at ends declared	6,947 lb · 3,151 kg	11,938 lb · 5,415 kg	+72% 11641
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,510 lb · 3,860 kg	10,240 lb · 4,645 kg	+20% 11641
Maximum permissible mass declared	—	17,196 lb · 7,800 kg	—
Wheelbase declared	103.1 in · 2,620 mm	104.1 in · 2,643 mm	—
Length declared	173.2 in · 4,400 mm	179.1 in · 4,550 mm	—
Width declared	87.8 in · 2,230 mm	86.8 in · 2,205 mm	—
Height declared	104.7 in · 2,660 mm	107.7 in · 2,735 mm	—
Ground clearance declared	—	14.4 in · 367 mm	—
Fuel tank declared	137.4 qt · 130.0 L	190.2 qt · 180.0 L	+38% 11641

Source

Source