Hürlimann H-496 Turbo (A) vs SAME Silver 100.6 DT

10 material differences · fewer than 12

Tractor one

1984–1989

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the H-496 Turbo (A) and the Silver 100.6 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-496 Turbo (A) and SAME Silver 100.6 DT, field by field
Field	H-496 Turbo (A)	Silver 100.6 DT	Gap
Engine
Engine power, claimed claimed	93.6 hp	98.6 hp	+5% Silver 100.6 DT
Engine declared	Hürlimann H-1104/9 WT	SAME-DEUTZ-FAHR 1000.6 A 1	differs
Displacement declared	4.56 L	6.00 L	+32% Silver 100.6 DT
Maximum torque declared	266 lb·ft · 360 N·m	249 lb·ft · 337 N·m	+7% H-496 Turbo (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	24.9 mph · 40 km/h	+60% Silver 100.6 DT
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	18.0 gpm · 68.0 L/min	15.1 gpm · 57.0 L/min	+19% H-496 Turbo (A)
Pressure declared	2,654 psi · 183 bar	2,176 psi · 150 bar	+22% H-496 Turbo (A)
Three-point lift at ends declared	6,947 lb · 3,151 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,510 lb · 3,860 kg	9,877 lb · 4,480 kg	+16% Silver 100.6 DT
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	103.1 in · 2,620 mm	103.7 in · 2,635 mm	—
Length declared	173.2 in · 4,400 mm	175.4 in · 4,455 mm	—
Width declared	87.8 in · 2,230 mm	78.0 in · 1,980 mm	+13% H-496 Turbo (A)
Height declared	104.7 in · 2,660 mm	107.7 in · 2,735 mm	—
Ground clearance declared	—	18.7 in · 475 mm	—
Turning radius, braked declared	—	12.8 ft · 3.91 m	—
Fuel tank declared	137.4 qt · 130.0 L	158.5 qt · 150.0 L	+15% Silver 100.6 DT

Source

Source