Hürlimann H-496 Turbo (A) or Massey Ferguson MF 3075 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the Hürlimann H-496 Turbo (A): hydraulic flow. On features, the Massey Ferguson MF 3075 (A) is ahead on forward gears and top speed.
- The Hürlimann H-496 Turbo (A) suits loader and hydraulic implement work better on this data: 36% (18.1 L/min / 4.8 gpm) more hydraulic flow.
- The Massey Ferguson MF 3075 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | H-496 Turbo (A) | MF 3075 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 64.3 kW (86.2 hp)Traktorenlexikon, “Hürlimann H 496” | 64.2 kW (86.1 hp)Traktorenlexikon, “Massey Ferguson MF 3075” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the H-496 Turbo (A) and the MF 3075 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the H-496 Turbo (A) and the MF 3075 (A). |
| Which pumps more oil for implements? | 68.0 L/min (18.0 gpm)Traktorenlexikon, “Hürlimann H 496” | 49.9 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3075” | AheadThe Hürlimann H-496 Turbo (A) has 36% more hydraulic flow (18.1 L/min / 4.8 gpm) than the Massey Ferguson MF 3075 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,151 kg (6,947 lb)Traktorenlexikon, “Hürlimann H 496” | 5,000 kg (11,023 lb)Traktorenlexikon, “Massey Ferguson MF 3075” | Not comparableNot comparable on three-point lift: the H-496 Turbo (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 496”); the MF 3075 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 3075”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,860 kg (8,510 lb)Traktorenlexikon, “Hürlimann H 496” | 4,415 kg (9,733 lb)Traktorenlexikon, “Massey Ferguson MF 3075” | Ahead (a fact, not an advantage)The Massey Ferguson MF 3075 (A) is 14% heavier (555 kg / 1,224 lb) than the Hürlimann H-496 Turbo (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the H-496 Turbo (A) and the MF 3075 (A). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Hürlimann H 496” | 32Traktorenlexikon, “Massey Ferguson MF 3075” | AheadThe Massey Ferguson MF 3075 (A) has 33% more forward gears (8 gears) than the Hürlimann H-496 Turbo (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the H-496 Turbo (A) and the MF 3075 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann H 496” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3075” | AheadThe Massey Ferguson MF 3075 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-496 Turbo (A) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Hürlimann H 496” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3075” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 3075” | No figureNo call on PTO independence: not stated for the H-496 Turbo (A). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Hürlimann H 496” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3075” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1984–1989 | 1993–1995 | Ahead (a fact, not an advantage)The Massey Ferguson MF 3075 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann H-496 Turbo (A) has 36% more hydraulic flow (18.1 L/min / 4.8 gpm) than the Massey Ferguson MF 3075 (A) (both pump flow, as stated by the source).
- The Massey Ferguson MF 3075 (A) is 14% heavier (555 kg / 1,224 lb) than the Hürlimann H-496 Turbo (A) (both unladen weight, as stated by the source).
- The Massey Ferguson MF 3075 (A) has 33% more forward gears (8 gears) than the Hürlimann H-496 Turbo (A) (both forward gears, as stated by the source).
- The Massey Ferguson MF 3075 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann H-496 Turbo (A) (both top speed forward, as stated by the source).
- The Massey Ferguson MF 3075 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the H-496 Turbo (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 496”); the MF 3075 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 3075”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources