6 material differences · fewer than 12
Tractor oneHürlimann H-496 Turbo (A)1984–1989No measured PTO figureTractor twoMassey Ferguson MF 26251985–1986No measured PTO figure
Which should you choose?
Read our verdict on the H-496 Turbo (A) and the MF 2625 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | H-496 Turbo (A) | MF 2625 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.6 hp | 93.7 hp | — |
| Engine declared | Hürlimann H-1104/9 WT | Perkins A 6.354-4 | differs |
| Displacement declared | 4.56 L | 5.80 L | +27% MF 2625 |
| Maximum torque declared | 266 lb·ft · 360 N·m | 269 lb·ft · 365 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 2625 |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 18.0 gpm · 68.0 L/min | — | — |
| Pressure declared | 2,654 psi · 183 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,510 lb · 3,860 kg | 12,015 lb · 5,450 kg | +41% MF 2625 |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 103.1 in · 2,620 mm | 107.3 in · 2,726 mm | — |
| Length declared | 173.2 in · 4,400 mm | 200.0 in · 5,080 mm | +15% MF 2625 |
| Width declared | 87.8 in · 2,230 mm | 91.3 in · 2,320 mm | — |
| Ground clearance declared | — | 17.7 in · 450 mm | — |
| Turning radius, braked declared | — | 16.1 ft · 4.90 m | — |
| Fuel tank declared | 137.4 qt · 130.0 L | 225.1 qt · 213.0 L | +64% MF 2625 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-496 Turbo (A) sources
- Source: Traktorenlexikon, “Hürlimann H 496”
Massey Ferguson MF 2625 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2625”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”