10 material differences · fewer than 12
Tractor oneHürlimann H-480 (A)1979–1982No measured PTO figureTractor twoMassey Ferguson MF 3060 (A)1986–1992No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1979–1982; 1986–1992). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | H-480 (A) | MF 3060 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 76.0 hp | +6% H-480 (A) |
| Engine declared | Hürlimann H-1104/7 | Perkins A 4.248 LF | differs |
| Displacement declared | 4.56 L | 4.07 L | +12% H-480 (A) |
| Maximum torque declared | 232 lb·ft · 315 N·m | 201 lb·ft · 272 N·m | +16% H-480 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 3060 (A) |
| Clutch declared | Dry SAME double clutch | pedal-operated dry and air-cooled single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 34.8 L/min | 13.6 gpm · 51.5 L/min | +48% MF 3060 (A) |
| Pressure declared | — | 2,277–2,350 psi · 157–162 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,722 lb · 3,049 kg | 7,859 lb · 3,565 kg | +17% MF 3060 (A) |
| Wheelbase declared | 92.1 in · 2,340 mm | 93.5 in · 2,375 mm | — |
| Length declared | 156.7 in · 3,980 mm | 155.9 in · 3,959 mm | — |
| Width declared | 76.8–104.3 in · 1,950–2,650 mm | 74.4 in · 1,889 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 22.2 in · 565 mm | +41% MF 3060 (A) |
| Fuel tank declared | 100.4 qt · 95.0 L | 156.4 qt · 148.0 L | +56% MF 3060 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-480 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 480”
Massey Ferguson MF 3060 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3060”