Hürlimann H-478 "Prestige" vs VALMET 900

9 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the H-478 "Prestige" and the 900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Hürlimann H-478 "Prestige" and VALMET 900, field by field
Field	H-478 "Prestige"	900	Gap
Engine
Engine power, claimed claimed	78.9 hp	88.8 hp	+13% 900
Engine declared	Hürlimann H-1000.4 W-1	VALMET 420 DS or DSRE	differs
Displacement declared	4.00 L	4.40 L	+10% 900
Maximum torque declared	193 lb·ft · 261 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry SLH single-disc clutch as driving clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Constant flow	differs
Pump flow declared	10.7 gpm · 40.5 L/min	14.7 gpm · 55.7 L/min	+38% 900
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,964 lb · 2,705 kg	7,419 lb · 3,365 kg	+24% 900
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,485 lb · 3,395 kg	7,408 lb · 3,360 kg	—
Wheelbase declared	91.3 in · 2,320 mm	88.3 in · 2,244 mm	—
Length declared	155.9 in · 3,960 mm	152.6 in · 3,877 mm	—
Width declared	82.3 in · 2,090 mm	85.7 in · 2,177 mm	—
Height declared	102.4 in · 2,600 mm	106.3 in · 2,700 mm	—
Ground clearance declared	18.5 in · 470 mm	19.9 in · 505 mm	+7% 900
Turning radius, braked declared	16.2 ft · 4.95 m	15.7 ft · 4.80 m	—
Fuel tank declared	116.2 qt · 110.0 L	83.5 qt · 79.0 L	+39% H-478 "Prestige"

Source

Source