Hürlimann H-478 "Prestige" or SOMECA 880 (TD)?

Which should you choose?

On performance, every comparable figure that differs favours the Hürlimann H-478 "Prestige": hydraulic flow. It is also ahead on top speed.

  • The Hürlimann H-478 "Prestige" suits loader and hydraulic implement work better on this data: 50% (13.5 L/min / 3.6 gpm) more hydraulic flow.
  • The Hürlimann H-478 "Prestige" suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-478 "Prestige" and SOMECA 880 (TD), with the call on each
QuestionH-478 "Prestige"880 (TD)Call
Which puts more power through the PTO shaft?54.3 kW (72.8 hp)Traktorenlexikon, “Hürlimann H 478 Prestige”53.9 kW (72.3 hp)Traktorenlexikon, “Someca 880”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-478 "Prestige" and the 880 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-478 "Prestige" and the 880 (TD).
Which pumps more oil for implements?40.5 L/min (10.7 gpm)Traktorenlexikon, “Hürlimann H 478 Prestige”27.0 L/min (7.1 gpm)Traktorenlexikon, “Someca 880”AheadThe Hürlimann H-478 "Prestige" has 50% more hydraulic flow (13.5 L/min / 3.6 gpm) than the SOMECA 880 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,705 kg (5,964 lb)Traktorenlexikon, “Hürlimann H 478 Prestige”2,090 kg (4,608 lb)Traktorenlexikon, “Someca 880”Not comparableNot comparable on three-point lift: the H-478 "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 478 Prestige”); the 880 (TD): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 880”) — not the same quantity, basis and condition.
Which is heavier, for traction?3,395 kg (7,485 lb)Traktorenlexikon, “Hürlimann H 478 Prestige”2,945 kg (6,493 lb)Traktorenlexikon, “Someca 880”Ahead (a fact, not an advantage)The Hürlimann H-478 "Prestige" is 15% heavier (450 kg / 992 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,850 kg (12,897 lb)Traktorenlexikon, “Someca 880”No figureNo call on maximum permissible mass: no figure on record for the H-478 "Prestige".
Which has the wider choice of gears?20Traktorenlexikon, “Hürlimann H 478 Prestige”8 to 16Traktorenlexikon, “Someca 880”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-478 "Prestige" and the 880 (TD).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann H 478 Prestige”25 km/h (15.5 mph)Traktorenlexikon, “Someca 880”AheadThe Hürlimann H-478 "Prestige" has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 880 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann H 478 Prestige”540/1000 rpmTraktorenlexikon, “Someca 880”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Someca 880”No figureNo call on PTO independence: not stated for the H-478 "Prestige".
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann H 478 Prestige”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 880”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19981975–1980Ahead (a fact, not an advantage)The Hürlimann H-478 "Prestige" is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann H-478 "Prestige" has 50% more hydraulic flow (13.5 L/min / 3.6 gpm) than the SOMECA 880 (TD) (both pump flow, as stated by the source).
  • The Hürlimann H-478 "Prestige" is 15% heavier (450 kg / 992 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
  • The Hürlimann H-478 "Prestige" has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 880 (TD) (both top speed forward, as stated by the source).
  • The Hürlimann H-478 "Prestige" is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on three-point lift: the H-478 "Prestige": lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 478 Prestige”); the 880 (TD): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 880”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources