Hürlimann H-478 "Prestige" vs SOMECA 880 (TD)

11 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1975–1980

No measured PTO figure

Which should you choose?

Read our verdict on the H-478 "Prestige" and the 880 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-478 "Prestige" and SOMECA 880 (TD), field by field
Field	H-478 "Prestige"	880 (TD)	Gap
Engine
Engine power, claimed claimed	78.9 hp	86.8 hp	+10% 880 (TD)
Engine declared	Hürlimann H-1000.4 W-1	O.M.-FIAT CO-3/75	differs
Displacement declared	4.00 L	4.56 L	+14% 880 (TD)
Maximum torque declared	193 lb·ft · 261 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated dry SLH single-disc clutch as driving clutch	Dry FERODO or LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	10.7 gpm · 40.5 L/min	7.1 gpm · 27.0 L/min	+50% H-478 "Prestige"
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	5,964 lb · 2,705 kg	4,608 lb · 2,090 kg	+29% H-478 "Prestige"
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,485 lb · 3,395 kg	6,493 lb · 2,945 kg	+15% H-478 "Prestige"
Maximum permissible mass declared	—	12,897 lb · 5,850 kg	—
Wheelbase declared	91.3 in · 2,320 mm	96.7 in · 2,457 mm	+6% 880 (TD)
Length declared	155.9 in · 3,960 mm	155.4 in · 3,946 mm	—
Width declared	82.3 in · 2,090 mm	77.6 in · 1,970 mm	+6% H-478 "Prestige"
Height declared	102.4 in · 2,600 mm	104.3 in · 2,650 mm	—
Ground clearance declared	18.5 in · 470 mm	18.9 in · 480 mm	—
Turning radius, braked declared	16.2 ft · 4.95 m	12.4 ft · 3.79 m	+31% H-478 "Prestige"
Fuel tank declared	116.2 qt · 110.0 L	122.6 qt · 116.0 L	+5% 880 (TD)

Source

Source