9 material differences · fewer than 12
Tractor oneHürlimann H-468 "Prestige"1989–1998No measured PTO figureTractor twoLandini 10.000 (DT)1978–1993No measured PTO figure
Which should you choose?
Read our verdict on the H-468 "Prestige" and the 10.000 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | H-468 "Prestige" | 10.000 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | Hürlimann H-1000.4 W | Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR) | differs |
| Displacement declared | 4.00 L | 5.79 L | +45% 10.000 (DT) |
| Maximum torque declared | 182 lb·ft · 247 N·m | 289 lb·ft · 392 N·m | +59% 10.000 (DT) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | pedal-operated dry SLH single disc clutch | Pedal-operated, dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 12.3 gpm · 46.5 L/min | — |
| Pressure declared | 2,611 psi · 180 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,790 lb · 3,080 kg | 9,976 lb · 4,525 kg | +47% 10.000 (DT) |
| Wheelbase declared | 90.2 in · 2,290 mm | 104.7 in · 2,660 mm | +16% 10.000 (DT) |
| Length declared | 157.1 in · 3,990 mm | 171.3 in · 4,350 mm | +9% 10.000 (DT) |
| Width declared | 77.6–101.2 in · 1,970–2,570 mm | 83.9 in · 2,130 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 12.3 ft · 3.76 m | — | — |
| Fuel tank declared | 89.8 qt · 85.0 L | 179.6 qt · 170.0 L | +100% 10.000 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-468 "Prestige" sources
- Source: Traktorenlexikon, “Hürlimann H 468 Prestige”
Landini 10.000 (DT) sources
- Source: Traktorenlexikon, “Landini 10000”