Hürlimann H-468.4 A vs VALMET 565/II

12 material differences

Tractor one

1998–2003

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the H-468.4 A and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-468.4 A and VALMET 565/II, field by field
Field	H-468.4 A	565/II	Gap
Engine
Engine power, claimed claimed	69.1 hp	74.0 hp	+7% 565/II
Engine declared	Hürlimann H-1000.4 W	VALMET 320 DS	differs
Displacement declared	4.00 L	3.30 L	+21% H-468.4 A
Maximum torque declared	187 lb·ft · 254 N·m	203 lb·ft · 275 N·m	+8% 565/II
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SLH single-disc clutch as driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	14.5 gpm · 55.0 L/min	+53% 565/II
Pressure declared	2,611 psi · 180 bar	2,901 psi · 200 bar	+11% 565/II
Three-point lift at ends declared	6,391 lb · 2,899 kg	5,688 lb · 2,580 kg	+12% H-468.4 A
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,768 lb · 3,070 kg	6,834 lb · 3,100 kg	—
Wheelbase declared	90.2 in · 2,290 mm	88.8 in · 2,255 mm	—
Length declared	157.1 in · 3,990 mm	152.4 in · 3,870 mm	—
Width declared	77.6 in · 1,970 mm	79.9 in · 2,030 mm	—
Height declared	100.0 in · 2,540 mm	104.5 in · 2,655 mm	—
Ground clearance declared	16.5 in · 420 mm	18.1 in · 460 mm	+10% 565/II
Turning radius, braked declared	12.3 ft · 3.76 m	13.8 ft · 4.20 m	+12% 565/II
Fuel tank declared	95.1 qt · 90.0 L	77.1 qt · 73.0 L	+23% H-468.4 A

Source

Source