Hürlimann H-466 (A) or International Harvester Hydro 84?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-466 (A) and International Harvester Hydro 84, with the call on each
QuestionH-466 (A)Hydro 84Call
Which puts more power through the PTO shaft?42.4 kW (56.8 hp)Traktorenlexikon, “Hürlimann H 466”42.3 kW (56.7 hp)Traktorenlexikon, “IHC Hydro-84”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-466 (A) and the Hydro 84.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-466 (A) and the Hydro 84.
Which pumps more oil for implements?33.7 L/min (8.9 gpm)Traktorenlexikon, “IHC Hydro-84”No figureNo call on hydraulic flow: no figure on record for the H-466 (A).
Which lifts more on the three-point hitch?2,294 kg (5,058 lb)Traktorenlexikon, “Hürlimann H 466”2,018 kg (4,449 lb)Traktorenlexikon, “IHC Hydro-84”Not comparableNot comparable on three-point lift: the H-466 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 466”); the Hydro 84: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC Hydro-84”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,840 kg (6,261 lb)Traktorenlexikon, “Hürlimann H 466”2,438 kg (5,375 lb)Traktorenlexikon, “IHC Hydro-84”Ahead (a fact, not an advantage)The Hürlimann H-466 (A) is 16% heavier (402 kg / 886 lb) than the International Harvester Hydro 84 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the H-466 (A) and the Hydro 84.
Which has the wider choice of gears?15 to 24 forwardTraktorenlexikon, “Hürlimann H 466”Stepless (CVT)Traktorenlexikon, “IHC Hydro-84”DifferTransmissions differ in kind: the Hürlimann H-466 (A) has 15 to 24 forward gears and the International Harvester Hydro 84 is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-466 (A) and the Hydro 84.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 466”30 km/h (18.6 mph)Traktorenlexikon, “IHC Hydro-84”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann H 466”540/1000 rpmTraktorenlexikon, “IHC Hydro-84”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “IHC Hydro-84”No figureNo call on PTO independence: not stated for the H-466 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Hürlimann H 466”2WD / 4WDTraktorenlexikon, “IHC Hydro-84”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1983–19861977–1981Ahead (a fact, not an advantage)The Hürlimann H-466 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann H-466 (A) is 16% heavier (402 kg / 886 lb) than the International Harvester Hydro 84 (both unladen weight, as stated by the source).
  • The Hürlimann H-466 (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Transmissions differ in kind: the Hürlimann H-466 (A) has 15 to 24 forward gears and the International Harvester Hydro 84 is stepless (CVT) — not called.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on three-point lift: the H-466 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 466”); the Hydro 84: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC Hydro-84”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources