Hürlimann H-466 (A) vs International Harvester Hydro 84

10 material differences · fewer than 12

Tractor one

1983–1986

No measured PTO figure

Tractor two

1977–1981

No measured PTO figure

Which should you choose?

Read our verdict on the H-466 (A) and the Hydro 84 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-466 (A) and International Harvester Hydro 84, field by field
Field	H-466 (A)	Hydro 84	Gap
Engine
Engine power, claimed claimed	64.1 hp	75.9 hp	+18% Hydro 84
Engine declared	Hürlimann H-916.4 W	INTERNATIONAL-HARVESTER D-246	differs
Displacement declared	3.66 L	4.03 L	+10% Hydro 84
Maximum torque declared	174 lb·ft · 236 N·m	160 lb·ft · 217 N·m	+9% H-466 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry SLH single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Pump flow declared	—	8.9 gpm · 33.7 L/min	—
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	5,058 lb · 2,294 kg	4,449 lb · 2,018 kg	+14% H-466 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	5,375 lb · 2,438 kg	+16% H-466 (A)
Wheelbase declared	92.9 in · 2,360 mm	88.0 in · 2,235 mm	+6% H-466 (A)
Length declared	159.4 in · 4,050 mm	144.9 in · 3,680 mm	+10% H-466 (A)
Width declared	80.7 in · 2,050 mm	70.1 in · 1,780 mm	+15% H-466 (A)
Height declared	98.0 in · 2,490 mm	100.0 in · 2,540 mm	—
Ground clearance declared	16.1 in · 410 mm	14.0 in · 356 mm	+15% H-466 (A)
Turning radius, braked declared	—	11.7 ft · 3.58 m	—
Fuel tank declared	74.0 qt · 70.0 L	81.4 qt · 77.0 L	+10% Hydro 84

Source

Source