Hürlimann H-362 (A) vs Massey Ferguson MF 4320 (A)

9 material differences · fewer than 12

Tractor one

1989–1996

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the H-362 (A) and the MF 4320 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-362 (A) and Massey Ferguson MF 4320 (A), field by field
Field	H-362 (A)	MF 4320 (A)	Gap
Engine
Engine power, claimed claimed	—	63.2 hp	—
Engine declared	Hürlimann H-1000.3 A	Perkins 903.27 Turbo	differs
Displacement declared	3.00 L	2.50 L	+20% H-362 (A)
Maximum torque declared	138 lb·ft · 187 N·m	171 lb·ft · 232 N·m	+24% MF 4320 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry SLH double clutch	pedal-operated dry and air-cooled single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	15.9 gpm · 60.0 L/min	—
Pressure declared	1,305 psi · 90 bar	—	—
Three-point lift at ends declared	4,784 lb · 2,170 kg	4,946 lb · 2,243 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	5,688 lb · 2,580 kg	5,258 lb · 2,385 kg	+8% H-362 (A)
Maximum permissible mass declared	10,141 lb · 4,600 kg	11,464 lb · 5,200 kg	+13% MF 4320 (A)
Wheelbase declared	83.5 in · 2,120 mm	83.9 in · 2,130 mm	—
Length declared	148.2 in · 3,765 mm	147.2 in · 3,740 mm	—
Width declared	70.5 in · 1,790 mm	73.2 in · 1,860 mm	—
Height declared	92.9 in · 2,360 mm	94.1 in · 2,390 mm	—
Ground clearance declared	—	18.5 in · 470 mm	—
Turning radius, braked declared	10.6 ft · 3.24 m	—	—
Fuel tank declared	82.4 qt · 78.0 L	88.8 qt · 84.0 L	+8% MF 4320 (A)

Source

Source